Daim Ntawv Qhia Tus Neeg Siv

132Control Surfaces Support Guide for Logic Pro
In Mixer (multichannel) views, the V-Pots in rows 2, 3, and 4 usually edit the parameter
that follows the parameter edited on row 1. For example, in Pan/Surround Mixer view,
row 1 edits the pan/surround angle, row 2 edits surround diversity, row 3 edits LFE level,
and row 4 edits spread.
In Channel view, all four rows represent a group of 32 editable parameters.
In Effect and Instrument Edit views, the C4 can be split into two groups (8/24, 16/16, or
24/8 parameters). See C4 function buttons.
Use Mackie C4 views in Logic Pro
The C4 provides a number of views that display a particular parameter type on the V-Pots/
V-Select buttons.
Use Pan/Surround Mixer view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2. Press V-Select 18 (labeled Surrnd Mixer).
In Pan/Surround Mixer view:
• Row 1 edits pan/surround parameter 1.
• Row 2 edits pan/surround parameter 2.
• Row 3 edits pan/surround parameter 3.
• Row 4 edits pan/surround parameter 4 (in this order: pan/angle, diversity, LFE, spread,
X, Y).
SINGLE Left/Right changes the parameter edited in row 1, thus affecting the parameters
shown (and edited) in rows 2 to 4.
Use Pan/Surround Channel view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2. Press V-Select 26 (labeled Surrnd).
In Pan/Surround Channel view, row 1 edits all eight surround parameters of a surround
channel. If a stereo or mono channel is selected, V-Pot 1 edits the Pan (or Balance)
parameter.