Daim Ntawv Qhia Tus Neeg Siv

122Control Surfaces Support Guide for Logic Pro
Control Modifier Assignment
DSP V-Pots
• Assignment Pan mode:
• DSP V-Pot 1 controls pan or
surround angle.
• DSP V-Pot 2 controls surround
diversity.
• DSP V-Pot 3 controls surround
LFE (level).
• DSP V-Pot 4 controls the Spread
parameter.
• Assignment Send mode:
• Controls Send 1 to 4, or 5 to 8
Levels.
• Effect Assign mode:
• Assigns effects to Insert slots 1
through 4, or 5 to 8.
• Effect Edit mode:
• Controls the selected effect
parameter.
INSERT/PARAM Switches between Effect Assign and
Effect Edit modes.
SCROLL Effect Edit mode: Shifts parameter
display by the number of DSP
V-Pots in the control surface group
(usually four).
CMD/ALT/FINE Effect Edit mode: Shifts parameter
display by one (parameter).
Mackie HUI function keys in Logic Pro
The table outlines the function keys and their assignments.
Note:A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
F1 Clears Overload LEDs.
SHIFT/ADD Switches to Mixer view, and displays
MIDI channel strips.
CMD/ALT/FINE Opens or closes Tracks window.
F2 Recalls screenset 2.
SHIFT/ADD Switches to Mixer view, and displays
input channel strips.
CMD/ALT/FINE Opens or closes Mixer.
F3 Recalls screenset 3.
SHIFT/ADD Switches to Mixer view, and displays
audio channel strips.