Daim Ntawv Qhia Tus Neeg Siv

111Control Surfaces Support Guide for Logic Pro
MackieBabyHUI
Set up your Mackie BabyHUI in Logic Pro
BabyHUI control surface units do not support automatic scanning. You need to manually
add these devices to your setup. When you add a device in this way, you need to specify
the MIDI In and Out port parameters.
Set up MackieBabyHUI units
To use the Mackie Baby HUI with Logic Pro:
1. Make sure that your BabyHUI units are connected bidirectionally with the computer,
using a MIDI interface.
2. Choose Logic Pro > Control Surfaces > Setup.
3. Choose New > Install in the Setup window.
4. Select the BabyHUI in the Install window.
5. Click the Add button.
6. Select the added device in the Setup window, then assign the MIDI Input and MIDI Out
parameters as appropriate.
BabyHUI assignments
Overview of Mackie Baby HUI assignments in Logic Pro
Assignments of Mackie BabyHUI interface elements to Logic Pro functions are covered in
the following sections.
• BabyHUI channel strips
• BabyHUI encoder assignment controls
• BabyHUI automation controls
• BabyHUI display controls
• BabyHUI utility controls
• BabyHUI navigation controls
• BabyHUI transport controls