Daim Ntawv Qhia Tus Neeg Siv

109Control Surfaces Support Guide for Logic Pro
Display text Meaning
User 7 Channel Strip User Mode 7. Encoders are initially unassigned.
User 8 Channel Strip User Mode 8. Encoders are initially unassigned.
The LCD backlight is red while recording, and green at other times.
The controls in the main section have the following meaning:
Control Assignment
Main encoder Controls the playhead in one of three modes. (See Pads 1–3 in
Transport
mode
.)
SETTING Held down in Send mode:
• Main encoder chooses the current send.
• Pads have special meaning—see
Send mode.
• LCDs display send destinations.
• Encoders choose send destinations.
Held down in Effect Edit mode:
• Main encoder chooses the current Insert slot.
• Pads have special meaning—see Effect edit mode.
• LCDs display effect names for all eight channels.
MESSAGE Enables or disables Duplicate Flip mode. When enabled, both the faders
and encoders control the parameter displayed in the LCDs.
SCENE While held down, Pads switch between Pad functions and channel views.
See microKONTROL and KONTROL49 Pads overview.
EXIT —
HEX LOCK Shifts fader bank to the previous eight channels. (LED is on if previous
channels exist.) Shifts fader bank to the previous eight parameters in
Effect Edit or Instrument Edit view.
ENTER Shifts fader bank to the next eight channels. (LED is on if subsequent
channels exist.) Shifts fader bank to the next eight parameters in Effect
Edit or Instrument Edit view.
< Octave Shift Down
> Octave Shift Up