Daim Ntawv Qhia Tus Neeg Siv

106Control Surfaces Support Guide for Logic Pro
Pad Assignment
4–8 Switches Pads to
Enable the User 4–8 modes.
These modes have unassigned Pads. You can assign them to key
commands with the Learn function.
9 Switches channel strips to Pan mode.
10 Switches channel strips to
Send mode.
11 Switches channel strips to Automation mode.
12 Switches channel strips to Instrument edit mode.
13 Switches channel strips to
Effect edit mode.
14–16 Switches channel strips to User 6–8 mode.
These modes have unassigned encoders. You can assign them with the
Logic Pro Learn function.
Korg microKONTROL and KONTROL49 Transport mode in Logic Pro
This mode is enabled by pressing SCENE and Pad 1.
Pad Assignment
1 Sets main encoder to Transport mode.
2 Sets main encoder to Scrub mode.
3 Sets main encoder to Shuttle mode.
7 Switches sync between internal and external.
8 Enables or disables metronome click (separately for Playback and
Record).
9 Enables or disables Cycle mode.
10 Enables or disables Autopunch mode.
11 Enables or disables Replace mode.
12 Enables or disables Solo.
13 Record
14 Pause
15 Play
16 Stop