Operation Manual

18 SERVICE WORK ON THE ENGINE 160
L02169-10
–
Remove screws

. Remove the oil filter cover

with the O-ring.
–
Pull oil filter

out of the oil filter housing.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Thoroughly clean the parts and sealing area.
L02170-10
–
Insert oil filter

.
–
Lubricate the O-ring of the oil filter cover. Mount the oil filter cover

.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover (RC 125) M5 8 Nm (5.9 lbf ft)
Screw, oil filter cover (RC 200) M5 8 Nm (5.9 lbf ft)
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
engine.