Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 86
9.29Adjusting chain guide x
600635-10
– Remove screws  and . Take off the chain guide.
Condition
Number of teeth: ≤ 44 teeth
– Insert nut  in hole . Position the chain guide.
– Mount and tighten screws  and .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Condition
Number of teeth: ≥ 45 teeth
– Insert nut  in hole . Position the chain guide.
– Mount and tighten screws  and .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.30Checking the brake discs
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
– Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)