Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 77
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
– Mount and tighten screw .
Guideline
Screw, steering stem M8 20 Nm
(14.8 lbf ft)
Loctite
®
243™
– Check the steering head bearing play. ( p. 75)
– Remove the motorcycle from the work stand.
9.22Handlebar position
0
0
BB
0
0
AA
400271-11
On the upper triple clamp, there are 2 holes at a distance  to each other.
Distance  between holes 15 mm (0.59 in)
The holes on the handlebar support are placed at a distance  from the center.
Distance  between holes 3.5 mm (0.138 in)
The handlebar can be mounted in 4 different positions. In this way, the handlebar can be
installed in the position most comfortable for the rider.