Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 70
9.13Checking the static sag of the shock absorber
00
0
BB
0
0
AA
400383-10
– Measure distance  of rear wheel unloaded. ( p. 69)
– Ask someone to help you by holding the motorcycle upright.
– Measure the distance between the rear axle and the fixed point again.
– Make a note of the value as measurement .
Info
The static sag is the difference between measurements  and .
– Check the static sag.
Static sag 20 mm (0.79 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber. x ( p. 71)