Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 69
100247-10
– Turn adjusting screw  clockwise to the last perceptible click.
– Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort 20 clicks
Standard 15 clicks
Sport 10 clicks
Full payload 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce suspension
damping.
9.12Measuring the unloaded rear wheel sag
– Jack up the motorcycle.
0
0
AA
400389-10
– Measure the distance – as vertically as possible – between the rear axle and a fixed
point, for example, a mark on the side cover.
– Make a note of the value as measurement .
– Remove the motorcycle from the work stand.