Owner's manual

TECHNICAL DATA - ENGINE TIGHTENING TORQUES 170
Screw, locking lever M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, rocker arm shaft M6 12 Nm (8.9 lbf ft) –
Screw, shift drum locating M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, shift lever M6 10 Nm (7.4 lbf ft)
Loctite
®
222
Screw, starter motor M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, stator bracket M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, thermostat housing M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, timing chain guide rail M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, timing chain tensioning rail M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Screw, valve cover M6 10 Nm (7.4 lbf ft) –
Screw, water pump cover M6 10 Nm (7.4 lbf ft) –
Screw, water pump wheel M6 10 Nm (7.4 lbf ft)
Loctite
®
243™
Oil jet, piston cooling M6x0.75 4 Nm (3 lbf ft)
Loctite
®
243™
Plug, crankshaft location M8 20 Nm (14.8 lbf ft) –
Stud, exhaust flange M8 10 Nm (7.4 lbf ft)
Loctite
®
243™
Cylinder head screw M10 Tightening sequence:
Tighten diagonally, beginning
with the rear screw on the
chain shaft.
Step 1
15 Nm (11.1 lbf ft)
Step 2
30 Nm (22.1 lbf ft)
Step 3
45 Nm (33.2 lbf ft)
Step 4
60 Nm (44.3 lbf ft)
Lubricated with engine oil