Owner's manual

STORAGE 166
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
14.2Putting into operation after storage
– Take the front from the work stand. ( p. 62)
– Take the rear from the work stand. ( p. 63)
–
Recharge the battery. x ( p. 118)
–
Install the battery. x ( p. 117)
– Set the clock. ( p. 35)
– Refuel. ( p. 56)
– Carry out checks before putting into operation. ( p. 48)
– Make a test ride.