Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 149
9.84Installing the oil filter x
100204-10
– Insert oil filters  and .
– Oil the O-rings of the oil filter cover. Mount oil filter covers  and .
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
9.85Cleaning the oil screens x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
– Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Place a suitable container under the engine.