Manualshelf

Owner's manual

ManualsBrandsKTM ManualsMotorcycles690 SMC US 2010
141142143144145146147148149150
MAINTENANCE WORK ON CHASSIS AND ENGINE 143
100282-10
– Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw .
– When adjusting the clutch lever make sure that there is a minimum clearance to other
parts of the vehicle.
Guideline
Minimum clearance 5 mm (0.2 in)
9.77Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
100281-10
– Remove screws .
– Remove cover with membrane .
– Check the fluid level.
Fluid level under top level of container 4 mm (0.16 in)
» If the level of the coolant does not meet specifications:
– Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) ( p. 183)
– Position the cover with the membrane. Mount and tighten the screws.