Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 130
600610-12
– Remove rubber cap .
600612-10
– Pull bulb socket  out of the reflector.
– Pull parking light bulb  out of the bulb socket.
– Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2,1x9,5d) ( p. 173)
– Insert the bulb socket in the reflector.
– Insert the rubber cap.
– Install the headlight mask with the headlight. ( p. 127)
9.65Changing the rear lamp
Note
Damage to reflector Reduced luminance.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.