Owner's manual
MAINTENANCE WORK ON CHASSIS AND ENGINE 129
600610-10
– Pull off connector .
– Take off rubber cap of the headlight bulb.
600611-10
– Detach spring bar .
– Remove headlight bulb .
– Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) ( p. 173)
– Fix the headlight bulb in the headlight using the spring bar.
– Replace the rubber cap. Attach the connector.
– Install the headlight mask with the headlight. ( p. 127)
9.64Changing the parking light bulb
Note
Damage to reflector Reduced luminance.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
– Remove the headlight mask with the headlight. ( p. 125)