Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 128
700543-01
– Position groove  on counterpiece .
100296-10
– Position brake-hose guide . Mount and tighten screws .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.63Changing the headlight bulb
Note
Damage to reflector Reduced luminance.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
– Remove the headlight mask with the headlight. ( p. 125)