Owner's manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 107
– Remove the fixation of the hand brake lever.
600490-11
– Take the front from the work stand. ( p. 62)
– Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
– Fully tighten screws .
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
– Take the rear from the work stand. ( p. 63)
9.46Removing rear wheel x
– Jack up the rear of the motorcycle. ( p. 63)
100267-10
– Press the brake caliper by hand on to the brake disc in order to press back the brake
piston.
– Remove nut . Remove chain adjuster .
– Holding the rear wheel, withdraw the wheel spindle .