Operation Manual

12 SERVICE WORK ON THE CHASSIS 60
12.16 Removing the front fender
Preparatory work
– Remove the headlight mask with the headlight. ( p. 94)
V00340-10
Main work
–
Remove screws

.
V00341-10
–
Remove screws

. Remove the front fender.
12.17 Installing the front fender
V00341-11
Main work
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
V00340-11
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the headlight mask with the headlight. ( p. 95)
– Check the headlight setting. ( p. 97)
12.18 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 51)