Operation Manual
22 TECHNICAL DATA 130
Standard 15 clicks
Sport 12 clicks
Compression damping, high-speed
Comfort 2.5 turns
Standard 2 turns
Sport 1 turn
Rebound damping
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Spring preload
Comfort 8 mm (0.31 in)
Standard 8 mm (0.31 in)
Sport 8 mm (0.31 in)
Spring rate
Weight of rider: 65… 75 kg (143… 165 lb.) 60 N/mm (343 lb/in)
Weight of rider: 75… 85 kg (165… 187 lb.) 63 N/mm (360 lb/in)
Weight of rider: 85… 95 kg (187… 209 lb.) 66 N/mm (377 lb/in)
Spring length 225 mm (8.86 in)
Gas pressure 10 bar (145 psi)
Static sag 35 mm (1.38 in)
Riding sag 110 mm (4.33 in)
Fitted length 415 mm (16.34 in)
Shock absorber fluid ( p. 142) SAE 2.5
22.9 Chassis tightening torques
Screw, fixed grip M4 5 Nm (3.7 lbf ft) Loctite
®
243™
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft) –
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft) –
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft) –
Remaining screws, chassis M5 5 Nm (3.7 lbf ft) –
Screw, battery terminal (All 250/300
models, XC‑W US, XC‑W Six Days US)
M5 2.5 Nm (1.84 lbf ft) –
Screw, light switch (All
EXC/EXC Six Days models,
125 XC‑W EU)
M5 1 Nm (0.7 lbf ft) –
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft) –
Nut, cable on starter motor (All
250/300 models, XC‑W US,
XC‑W Six Days US)
M6 4 Nm (3 lbf ft) –
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft) –
Remaining screws, chassis M6 10 Nm (7.4 lbf ft) –
Screw, ball joint of push rod on foot
brake cylinder
M6 10 Nm (7.4 lbf ft) Loctite
®
243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft) Loctite
®
243™
Screw, front brake disc M6 14 Nm (10.3 lbf ft) Loctite
®
243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft) Loctite
®
243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft) –
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft) –
Nut, rear sprocket screw M8 35 Nm (25.8 lbf ft) Loctite
®
2701™
Nut, rim lock M8 12 Nm (8.9 lbf ft) –
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft) –
Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –