Operation Manual

16 COOLING SYSTEM 102
V00376-10
(All 250/300 models)
–
Make sure that screw

is tightened.
– Position the motorcycle upright.
– Completely fill the radiator with coolant.
Coolant ( p. 141)
V00380-10
–
Loosen screw

and wait until coolant escapes without bubbles.
–
Mount and tighten screw

.
Guideline
Bleeder screw, cylinder head M6 10 Nm
(7.4 lbf ft)
V00379-10
– Completely fill the radiator with coolant.
Coolant ( p. 141)
–
Mount radiator cap

.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
– Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Allow the engine to warm up and cool down again.
Finishing work
– Check the coolant level. ( p. 100)