Installation guide

-37-
Mirror
Sniffer Mode: Display the status the activation or deactivation of Port Mirror function.
Sniffer Port: Display the port for monitoring.
Source Port: Display the port for being monitored.
Trap Event
Trap IP The IP address of the first Trap manager
Trap IP The IP address of the second Trap manager
Warm Boot Trap event enable setting
Cold Boot Trap event enable setting
Illegal Login Trap event enable setting and counter
Link Up Trap event enable setting and counter
Link Down Trap event enable setting and counter
Rx error threshold Trap event enable setting and counter
Tx error threshold Trap event enable setting and counter
Error threshold Setting
Maximum Packet Length
Jumbo Frame(bytes): Display the settings about the maximum length of the packet that each port
of the switch can accept.
<Refresh> Button to refresh all status
3.4.2 Warm Restart
Warm Start function allows to reboot the switch with the current settings and configuration. After
upgrading software, then you must reboot to have the new configuration taken effect.
Press <Yes> button to confirm warm restart function, and it will take around thirty (30) seconds to
complete the system boot.