Installation guide

-36-
Each of them will be described in detail orderly in the following sections.
System Status
Product Name: To show the product name of this device.
Firmware Version: To show the firmware version of this switch.
Hardware Version: To show the hardware version of this switch.
Serial Number: The serial number is assigned by the manufacturer.
IP Address: To show the IP address of this switch.
Subnet Mask: To show the subnet mask of this switch.
Default Gateway: To show the default gateway of this switch.
MAC Address: To show the Ethernet MAC address of this switch.
System Name: To show the special name for this switch.
Auto Logout Timer: To show the setting of auto-logout timer in the web UI.
Ports Status
Port: Display the port number. The number is 1 - 24. Both port 23 and 24 are
optional modules.
Link Status: Link Status will show the current active link speed and duplex. Otherwise,
it shows [Down].
Speed: Display Auto or Forced the speed mode.
Flow Control: Show each port flow control status.
Aggregation
Normal: Display the ports that do not join any aggregation trunking group.
Group 1~8: Display the members of the Group.
VLAN
VLAN Mode: Display Port-based, Tag-based and metro mode, which depends on the
setting in VLAN mode configuration function.
ID: Display the Group ID.
Description: Display the description defined by administrator is associated with a
VLAN group.
VID: Display VLAN identifier. Each tag-based VLAN group has a unique VID.
It appears only in tag-based mode.
Member: Display the port members belonging to each VLAN Group.
Management Interface
State VLAN Tagging status of the switch management interface
VID VID used by the switch management interface