Installation guide

4. LEDs Conditions Defined
4.1 LEDs Defined
The 16-port Switch LEDs provide useful information about the switch and the
status of all individual ports.
LED STATUS CONDITION
Power ON Switch is receiving power.
Green The LED function of Port 1 ~ 16 is "Link / Act".Display
Mode**
Yellow The LED function of Port 1 ~ 16 is "FDX / Col."
(Full Duplex / Collision).
ON Port has established a valid link.if in "Link /
Act" function
Flashing Data packets being received or sent.
ON The connection is Full Duplex.if in "FDX /
Col." function
Flashing Packet collisions occurring. A low
level of collision is a part of normal
Ethernet Operation.
Green
The connection speed is 100Mbps.
LEDs of
Port 1~16
Yellow
The connection speed is 10Mbps.
** The Display Mode is switched by the "PUSH" (a push button switch) on the panel.
161514131211109
87654321
Power
Display
Mode
Display
Mode
PUSH
Yellow : 10M / Green : 100M
Green : Link / Act
Yellow : FDX / Col