Instruction manual

-7-
Designed for Industrial Applications
For industrial environment, the switches are designed with the following enhanced features:
 High and wide operating temperature
 Wide operating voltage range for DC power input
 Power input interface: Screw terminal block and DC jack for adapter
 Relay output for device power failure alarm
 DIN rail mounting support for industrial enclosure
 Panel mounting support for industrial enclosure
1.1 Features
Basic functions
• Fast Ethernet switch with 8 10/100TX copper ports
• Auto MDI/MDI-X detection on all 10/100TX ports
• Auto-negotiation capable on all 10/100TX ports
• 100FX ports support wide range of fiber options
- ST, SC connectors
- Multi-mode fiber, Single mode duplex fiber
• Far End Fault function on 100FX ports
• Auto configuration for 10/100TX or 100FX for port 7 and port 8
• Back pressure flow control for half duplex operation
• IEEE 802.3x flow control for full duplex operation
• Broadcast storm protection function
• Provides comprehensive LED indication
• Support DIN-rail and panel mounting
Management functions
• Port configuration control and status monitoring
• Provides Quality of Service (QoS) control for packet traffic
• Supports tagged Virtual LAN (VLAN) network
• Supports redundant ring function for industrial application
• Supports SNMP management interface
• Provides SNMP based event traps
• Supports Telnet management interface
• Supports Web based browsing interface
• In-band embedded firmware upgrade function