Instruction manual

-64-
Ring & Port Status Description
Ring Status Display the current status in a redundant ring operation
STANDBY - the ring is under fault monitoring (on guard)
BACKUP - the backup link is activated and ring enters into backup state
Port No. The port number of two connected ports for ring connection
Port The port function of the specified ports (See port function setting above)
Ring - the port function is a ring port
Backup - the port function is a backup port
Link Status The physical port link status of the connected port
Up - the link is up
Down - the link is down
Control The port TX/RX is disabled or enabled.
Enabled - the port operation is enabled
Disabled - the port operation is disabled
Standby - the port operation is disabled now but in standby state
Activated! - the port operation is enabled now and backup activated state
Ring List Button to display all found member switches and their status in a ring
It is useful to use [Ring List] button to examine the planned ring after configuration.