Instruction manual

-57-
Group Settings Description
Groups Specify the VLAN group for member port configuration
Port Specify the port to be added into or deleted from the specified group.
N - unchanged
Add - add the port into member port list of the group
Del - delete the port from member list of the group
Apply Button to confirm the settings
Group Settings Description
VLAN ID Current VLAN ID (VID) of each VLAN group
Settings Set new VLAN ID of VLAN group, valid values : 1 ~ 4095
? Button to view information about VLAN ID
Apply Button to confirm the settings
Note:
1. Group 9 is a VLAN dedicated for management security purpose and it is the default group
of the management port of the switch.
2. The management is allowed only through one of the port members in Group 9. Group 9
limits the ports which are allowed to access the management interfaces.
3. Group 9 must have at least one port member. Otherwise, there is no chance to configure the
switch again unless restoring back to factory defaults.