User's Manual

-23-
5.2.6 Mirror
Port mirror function is used to mirror traffic from source port to a target port for analysis. Only 2 ports
can be monitored (mirrored) simultaneously to 1 Monitor port (target port). (Note that the target port
must be in the same VLAN as the source ports.)
Settings Functions
Monitor Port Select the switch port, from 1 to 16 to be the target port to collect traffic info
Source Ports To select the mirror ports, Click the check box of the port.
Apply Click button to save settings.
Caution:
Because settings in VLAN, Port aggregation, and Mirror functions are correlative, make sure
that the setting will not influence others. It is suggested not to activate more than one function for
one port.
5.2.7 Statistics
To check the status of port traffic, click statistic tab. You can click [Clear] button to erase all records
or click [Refresh] to show the latest status.