- KTI 10/100 Managed Fast Ethernet Switch Operation Manual

-96-
The following MIB-2 objects are related to the switched ports and are
indexed by a port number 1 ~ 27 (27 = CPU port):
Port MIB-2 Objects Set/Get Value Options
ifIndex.1 ~ 27 Get Physical port number
ifDescr.1 ~ 26 Get text - Port 1~26 on unit 1
ifDescr.27 Get text - ethernet switch low driver
ifType.1 ~ 27 Get erhernet-csmacd(6)
ifSpeed.1 ~ 24 Get 100000000=100M, 10000000=10M
ifSpeed.25 ~ 26 Get 100000000=100M, 10000000=10M
1000000000=1000M, 0=No module
ifSpeed.27 Get 10000000 = 10M
ifAdminStatus.1 ~ 27 Set up(1) = enable port
down(2) = disable port
ifAdminStatus.1 ~ 27 Get up(1) = port is enabled
down(2) = port is disabled
ifOperStatus.1 ~ 27 Get up(1) = port status link up
down(2) =port status link down
ifLastChange.1 ~ 27 Get Time of port status change
ifInOctets.1 ~ 27 Get Port total bytes received
ifInUcastPkts.1 ~ 27 Get Port total unicast packet received
ifInNUcastPkts.1 ~ 27 Get Port total non-unicast packet received
ifInDiscards.1 ~ 27 Get Port total packet dropped
ifInErrors.1 ~ 27 Get Port total error packet received
ifOutOctets.1 ~ 27 Get Port total bytes sent
ifOutUcastPkts.1 ~ 27 Get Port total unicast packet sent
ifOutNUcastPkts.1 ~ 27 Get Port total non-unicast packet sent
ifOutDiscards.1 ~ 27 Get Port total packet aborted
ifOutErrors.1 ~ 27 Get Port total error packet sent
ifOutQLen.11 Get Port total output queued packets