Installation guide
-7-
Quality of Service
For conversion between two different speeds, the device is featured with powerful Quality of Service
(QoS) function which can classify the priority for received network frames based on the ingress port
and frame contents. Furthermore, many service priority policies can be configured for egress operation.
Web Management
The device is embedded with an Http server which provides management functions for advanced
network functions including Port Control, Quality of Service, and Virtual LAN functions. The manage-
ment can be performed via Web browser based interface over TCP/IP network.
1.1 Features
Basic functions
Provides tri-speed 10/100/1000Mbps copper to 1000Mbps fiber conversion
Provides mini-GBIC SFP design for the fiber port to accommodate any type of SFP fiber transceiver
when needed.
Support full wire speed Gigabit copper to Gigabit fiber conversion
The copper port supports auto-negotiation and auto-MDI/MDI-X detection
Copper port auto-negotiation mode, speed and duplex configuration by DIP switch settings
Link Fault Pass Through function allows link fault status passes through between copper link and
fiber link transparently.
Far End Fault function on fiber port
Supports 802.3x flow control for full-duplex and backpressure for half-duplex
Supports loopback test between two devices over fiber link
Supports remote twisted-pair status monitoring
Diversified mounting support : desktop, wall, center rack, and optional Din-Rail support
Center chassis installation : support installation in a center chassis rack with benefits of central
software management and redundant power backup.
Support wide range of fiber options : multimode fiber, single mode fiber (short reach up to long
reach), Bi-directional single fiber, and CWDM
Management functions
Port configuration control and status monitoring
Supports Jumbo frame conversion
Packet filtering
802.1Q Control between two ports
Quality of Service (QoS) control for packet traffic
Supports loopback test
Supports remote twisted-pair status monitoring
In-band embedded firmware upgrade function
Web-based browsing interface