User`s manual

-57-
4.23 Link Aggregation
Configuration Description
System Priority Determines which switch in an LACP link controls port priorities
Link Aggregation Algorithm MAC Source – use MAC SA as base to hash to a member port for packet forwarding
MAC Src&Dst - use MAC SA & DA as base to hash to a member port for packet forwarding
[Apply] Click to apply the configuration change
Member Member ports of Link Group x (Trunks)
Link Group 1 Trunk group 1, valid member ports: P1, P2, P3, P4
Link Group 2 Trunk group 2, valid member ports: P5, P6, P7, P8
Link Group 3 Trunk group 3, valid member ports: P25, P26
State Disable – The Link Group is disabled.
Enable – The Link Group is enabled.
Type Static – The type of link aggregation mechanism is static and proprietary.
LACP – LACP-compliant mode (IEEE 802.3ad)
Operation Key An integer value assigned to the port that determines which ports are