User`s manual

-37-
4. Warning Message displayed when changing Tag-based VLAN mode to Port-based VLAN mode
4.12 VLAN Member (Port-based)
Configuration Description
Port Specify an ingress port for reading or configuring its allowed member ports
Member port Select the allowed egress ports for the above specified ingress port
[Apply] Click to apply the configuration change
[LoadDefault] Click to use default setting values
Remark:
1. In port-based VLAN mode, the packets received on one ingress port can only be forwarded to the ports
among the allowed egress ports associated to the ingress port.
2. The default setting is that every port is allowed to forward packets to any ports.
3. The current setting for all ports is displayed as follows: