User`s manual

-33-
Configuration Description
Port No. The selected destination ports are forwarded all packets received on the source ports.
Tx Rate Rate value: 0 ~ 255
Rx Rate Rate value: 0 ~ 255
Speed Base Low – Low rate base
Port 1 ~ Port 26: Port Rate (Bandwidth) = Rate value * 32Kbps
High – High rate base
Port 1 ~ Port 24: Port Rate (Bandwidth) = Rate value * 256Kbps
Port 25 ~ Port 26: Port Rate (Bandwidth) = Rate value * 2048Kbps
[Apply] Click to apply the configuration change.
[Refresh] Click to refresh the port rate display.
[LoadDefault] Click to use the default configuration for all ports.
Status Description
Link Speed The port link speed: 10Mbps, 100Mbps, 1000Mbps
Note:
1. Rate value = 0 means full speed for Tx & Rx.
2. Port 1 ~ Port 24 Link speed 10M with high rate base: Valid rate value 1~39
3. Port 25 ~ Port 26 Link speed 10M with high rate base: Valid rate value 1~4
4. Port 25 ~ Port 26 Link speed 100M with high rate base: Valid rate value 1~48