User`s manual

-28-
Configuration Description
MAC Address The MAC address factory configured for the switch
It can not be changed in any cases.
Number of Ports The number of LAN ports equipped in the switch
System Version Vx.xx
Password Set new password
Confirm Password Re-enter the new password
Name *
1
Set the system name for this switch unit
Contact Contact person in case of any problem with this switch unit
Location Location where this switch unit is located
IP Address Configured IP address for the switch management
Subnet Mask Configured subnet mask for IP address for the switch management
Default Gateway Configured gateway IP address for the switch management
IP Configuration Mode Static – Use the above configured IP settings
DHCP *
2
- Use DHCP to get dynamic IP address configuration for the switch
[Apply] Click to apply the configuration change
Note:
1. It is suggested to give each switch unit a system name as an alternative unique identification beside IP
address.
2. Setting change of DHCP mode takes effective in next boot-up.