User`s manual

-26-
Configuration
System Configuration Switch information, system and IP related settings
Port Configuration Port link status, port operation mode configuration
Port Mirroring Port mirroring related configuration
Bandwidth Control Port Tx rate Rx rate control
Broadcast Storm Control Broadcast Packet Storm protection control configuration
VLAN Mode VLAN related configuration
VLAN Member VLAN group member settings
Multi to 1 VLAN Setting Special “Multi to 1” VLAN application setting
QoS Priority Mode Quality of Service priority configuration
Port, 802.1p, IP/DS based QoS port-based, 802.1p-based, IP/DS-based settings
TCP/UDP Port Based TCP/UDP port number based QoS control
MAC Address Binding Static MAC address configuration associated to each port
TCP/UDP Filter TCP/UDP protocol-based filtering
STP Bridge Settings STP/RSTP bridge configuration
STP Port Settings STP/RSTP per port configuration
Link Aggregation Port link aggregation (port trunk) related configuration
Miscellaneous Configurations of Packet aging time, IGMP snooping, VLAN striding, VLAN uplink
ports
Monitoring
Port Counter List statistics for all ports
Maintenance
Backup/Recovery Backup switch’s current configuration
Upload a saved configuration file to the switch
Reboot System Command to reboot the switch
Restore Default Command to restore the switch with factory default settings
Update Firmware Command to update the switch firmware
Logout Command to logout from the switch management