Installation guide

-7-
1.3 LED Indicators
LED Function
POWER Power status
1 - 8 Port 1 – Port 8
LINK (Green) Link and activity status (Port 1 - Port 8)
100M (Yellow) 100Mbps speed status (Port 1 - Port 8)
1.4 Specifications
10/100 Copper Ports
Compliance IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connectors Shielded RJ-45 jacks
Pin assignments Auto MDI/MDI-X detection
Configuration Auto-negotiation or software control
Transmission rate 10Mbps, 100Mbps
Duplex support Full/Half duplex
Network cable Cat.5 UTP up to 100 meters
Switch Functions
Forwarding & filtering Non-blocking, full wire speed
Switching technology Store and forward
Maximum packet length 1536 bytes
MAC Addresses Table 1K entries
Port configuration Auto-negotiation for speed and duplex
Flow control IEEE 802.3x pause frame base for full duplex operation
Back pressure for half duplex operation
MAC Aging time 300 seconds
Storm control Broadcast packets are dropped when more than 64 broadcast packets are received.
DC Power Input
Screwed terminal block 3P (Vin+, Vin-, Chassis Ground)
DC Jack Connector -D 6.3mm / + D 2.0mm
Operating Voltages +7 ~ +30VDC
Power Consumption 2.3W max.
Power Saving Mode Total consumption 0.28W when all ports link down
Mechanical
Dimension (base) 40 x 80 x 95 mm (WxDxH)