KF230TX

A2. RJ-45 Connector & Cables

Figure A-1 shows the pin assignments of the RJ-45 connector for

10BASE-T and 100BASE-TX network. The pin assignments are iden-

tical for 10BASE-T and 100BASE-TX, using Category 5 UTP cable.

Pin Signal Name

1 Transmit +

2 Transmit -

3 Receive +

4 NC (no connection)

5 NC (no connection)

6 Receive -

7 NC (no connection)

8 NC (no connection)

Figure A-1 RJ-45 Connector Pin Assignments

Cabling Requirements:

10Mbps 10BASE-T Ethernet Category 3, 4, or 5 UTP Cable

The maximum distance is 100 meters.

100 Mbps 100BASE-TX Ethernet Category 5 UTP Cable

The maximum distance is 100 meters.