Installation guide

-8-
Twisted-Pair Interface (TP Port, Copper Port)
Connector Shielded RJ-45
Pin Assignments Auto MDI/MDI-X detection
Signal Compliance IEEE 802.3 10Base-T, 802.3u 100Base-TX
Data Speed 10Mbps or 100Mbps
Duplex Mode Half-duplex or Full-duplex
Configuration Auto-negotiation capable and optional
forced manual settings
Cable Types 10Mbps - Cat. 3, 4, or 5 UTP
100Mbps - Cat. 5 UTP
Supported Link Distance Up to 100 meters
Fiber Optic Interface (FX Port)
Signal Compliance IEEE 802.3u 100Base-FX
Connector SC, ST or single SC (model dependent)
Data Speed 100Mbps
Duplex Mode Full-duplex and optional half-duplex
Cable Types Multimode (MMF) - 50/125, 62.5/125
Single mode (SMF) - 9/125
Supported Link Distance MMF up to 2km
SMF, single SMF ( model dependent)
Eye Safety IEC825 Class 1
Refer to section 1.3 for detailed optical specifications.