Installation guide

-10-
DC Power Input
Interface Screw-type terminal block
( 2 sets for power wire cascading)
DC Jack (-D6.3mm/+D2.0mm)
Operating Input Voltages +7V ~ +30V(+5%)
Power consumption 1.7W @+7.5VDC input
2.4W @+24VDC input
2.6W @+30VDC input
Basic Information
Forwarding Throughput Full wire speed at 100M full duplex
10Mbps - 14,880 pps at 64-byte packets
100Mbps - 148,800pps at 64-byte packets
Packet Types Transparent and no modification for
- IEEE 802.3 standard packets
- IEEE 802.1Q VLAN tagged packets
Packet Length Up to 1600 bytes at store-and-forward mode
No limit at smart-forward mode 100to100
Flow Control Back-pressure for half-duplex mode
802.3x pause-frame base for full duplex mode
Mechanical
Dimension (base) W 28mm x D 82mm x H 95mm
Housing Enclosed metal with no fan
Mounting Support DIN-rail mounting, Panel mounting
Weight 252g
Environmental
Operating Temperature Typical -20
o
C ~ 70
o
C (model dependent)
Storage Temperature -20
o
C ~ 85
o
C
Relative Humidity 5% ~ 90%