Installation guide
-8-
LED Indicators
LED DISPLAY STATE INTERPRETATION
PWR Power status ON Power on
OFF Power off
TP LINK TP port link status ON Link up and no traffic
OFF Link fault
Blink Rx/Tx activities
TP 100M TP port speed status ON 100Mbps
OFF 10Mbps
TP FDX TP port duplex status ON Full duplex
OFF Half duplex
Blink Collisions on half duplex
FX LINK FX port link status ON Link up and no traffic
OFF Link fault
Blink Rx/Tx activities
FX OL FX port optical link ON Optical signal is detected
OFF No optical signal
DC Power Input
DC Input Jack D 6.3mm D 2.0mm
Operating Input Voltages +4.75V ~ +12.6V
Power consumption 2W max. (0.27A @+7.5V)
Power Supply Options External AC-DC power adapters
Rated AC 100-240V/50-60Hz DC7.5V 0.5A min.
Rated AC120V/60Hz DC7.5V 0.5A min.
Rated AC230V/50Hz DC7.5V 0.5A min.
Rated AC240V/50Hz DC7.5V 0.5A min.
Rated AC100V/50-60Hz DC7.5V 0.5A min.
Rated AC100V/50-60Hz DC5V 1A
Center Connector
Connector Futurebus 6x4
Function Center chassis installation
Signals Power inputs
Ground
Management interfaces