Quick Operation Guide

KNC-p3BR_IR IP Mini Bullet Camera·Quick Operation Guide
6
6
● The sensor may be damaged if exposed to laser energy, so when
any laser equipment is in use, make sure that the sensor will not
be exposed to the laser beam.
● Do not place the camera in extremely hot or cold (see camera
specifications) locations. Do not exceed the rated environmental
(EZHD66) conditions. Do not expose the camera to high levels of
electromagnetic (RF) radiation.
● To avoid heat accumulation, good ventilation is required in the
operating environment.
● Keep the camera away from solvents while in use; exposure to
liquids should not exceed EZHD66 environmental conditions.
● During shipping, the camera shall be packed in its original
packing, or packing providing the equivalent protection.
● Improper use or replacement of any batteries (if so equipped)
may result in the hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
● If the product does not function properly, Dealers please contact
KT&C; End Users please contact your KT&C Certified Dealer or an
authorized service center. Do not disassemble the camera for
repair or maintenance by yourself. (KT&C shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)