Quick Operation Guide

KNC-p3BR_IR IP Mini Bullet Camera·Quick Operation Guide
9
9
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing haze, distortion or improper scene exposure.
Steps:
1. Attach the drill template on the wall or ceiling.
Figure 2-1 Attach the template
2. Secure the camera to the wall or ceiling with the supplied screws
and expansion anchors (if required). Attach the video coax and
power cables.
Figure 2-2 Secure the Camera to the Wall/Ceiling
Screw Hole
Template