User's Manual

| Send code [2] Send sound: Transmits a cycling tone over-the-air.
Send code: Transmits ANI code and alarm.
29
TAIL - Squelch Tail
Elimination
OFF [0] | ON [1]
This function is used eliminate squelch tail noise between
handholds that are communicating directly (no repeater).
Reception of a 55 Hz or 134.4 Hz tone burst mutes the audio
long enough to prevent hearing any squelch tail noise.
30
ROGER - Roger
Beep
OFF [0] | ON [1]
Sends an end-of-transmission tone to indicate to other stations
that the transmission has ended.
31 Language English [0] | Chinese [1]
English or Chinese language prompts (including voice and
display) are allowed.
32
Reset - Restore
defaults
VFO [0] | ALL [1]
Resets the radio to factory defaults, with some exceptions.
- VFO: Will reset all functional setting and renew factory
default parameter of function setting, but not resetting the
parameter of channels.
- ALL: Will reset all functional setting and the parameter of all
channels, and renew factory default of function.
33 Special DCS OFF [0] | ON [1]
The special DCS is a dynamic DCS, only DCS is set, and this
function is enabled.
- ON: Turn on the special DCS function;
- OFF: Turn off the special DCS function.