User's Manual

Note: Names must be entered using software.

22 Busy Lockout OFF [0] | ON [1]

Disables the [PTT] key on a channel that is already in use. The

transceiver will sound a beep tone and will not transmit if the

[PTT] key is pressed when a channel is already in use.

Key Auto Lock –

Automatic Keypad

Lock

OFF [0] | ON [1]

When ON, the keypad will be locked if not used in 8 seconds.

Pressing the [#] key for 3 seconds will unlock the keypad.

Direction -

Frequency Shift

Direction

None [0]

｜

Plus [1]

｜

Minus[2]

Enables access of repeaters in VFO/Frequency Mode.

None: TX = RX (simplex).

Plus: TX will be shifted higher in frequency than RX.

Minus: TX will be shifted lower in frequency than RX.

Offset - Frequency

shift amount

Manual input frequency (range

0.001-99.998. eg 05.000)

Specifies the difference between the TX and RX frequencies

Memory - Store a

Memory Channel

001 - 128

This menu is used to either create new or modify existing

channels (1 through 128) so that they can be accessed from

MR/Channel Mode.

Delete - Delete a

memory channel

001 - 128

This menu is used to delete the programmed information from

the specified channel (1 through 128) so that it can either be

programmed again or be left empty.

28 Alarm Mode On site [0] | Send sound [1] On site: Sounds alarm through your radio speaker only.