User's Manual

You simultaneously will holding down the [PTT] and [SK1] key.
17
S-CODE - Signal
Code
1[0] | 2[1] | 3[2] | 4[3] | 5[4] | 6[5] | 7[6]
| 8[7] | 9[8] | 10[9] | 11[10] | 12[11] |
13[12] | 14[13] | 15[14]
Selects 1 of 15 DTMF codes. The DTMF codes are programmed
with software and are up to 5 digits each.
18
Scan Mode -
Scanner Resume
Method
Time[0]|Carrier [1] |Search [2]
Scanning Resume Method :
Time: Scanning will resume after a fixed time has passed.
Carrier: Scanning will resume after the signal disappears.
Search: Scanning will not resume.
19
PTT-ID - When to
send the PTT-ID
OFF [0]｜BOT [1]｜EOT [2]｜BOTH [3]
Determines when to sent PTT-ID. OFF: No ID is sent.
BOT: The selected S-CODE is sent at the beginning.
EOT: The selected S-CODE is sent at the ending.
BOTH: The selected S-CODE is sent at the beginning and
ending.
20
MDF-A - Channel
Mode A Display
Name [0]｜Frequency [1]
[A] Name/Frequency Mode Display Format.
Name: Displays the channel name.
Frequency: Displays programmed Frequency.
Note: Names must be entered using software.
21
MDF-B - Channel
Mode B Display
Name [0]
｜
Frequency [1]
[B] Name/Frequency Mode Display Format
Name: Displays the channel name.
Frequency: Displays programmed Frequency.