User's Manual

2.1 Antenna
This transceiver is fitted with a Male SMA connector. To mount your antenna (Female SMA Connector), align
the two connectors and turn clockwise until it stops.
NOTE
• Do not over-tighten your antenna to avoid damage to the
connectors.
• When installing the antenna, don't grip it by the top. Grip by the
base and turn.
• Do not hold the antenna with your hand or wrap the outside of it
to avoid bad operation of the transceiver.
• Never transmit without an antenna.
2.2 Belt clip
At the back of the radio there are two parallel screws mounted above the battery, remove these and thread