User's Manual

DCS specific low-level digital signal. If the station you are listening
to does not transmit this specific signal, you will not hear
anything.
12
Rx CTCSS - Receiver
CTCSS
OFF[0] | see CTCSS Table in Appendix D
Mutes the speaker of the transceiver in the absence of a
specific and continuous sub-audible signal. If the station you
are listening to does not transmit this specific and continuous
signal, you will not hear anything.
13
Tx DCS -
Transmitter DCS
OFF [0] | see DCS Table in Appendix E
Transmits a specific low-level digital signal to unlock the
squelch of a distant receiver (usually a repeater).
14
Tx CTCSS -
Transmitter CTCSS
OFF[0] | see CTCSS Table in Appendix D
Transmits a specific and continuous sub-audible signal to
unlock the squelch of a distant receiver (usually a repeater).
15
DTMFST - DTMF
Side Tone
OFF [0]| DT-ST[1] | ANI-ST [2]| DT+ANI[3]
Determines when DTMF Side Tones can be heard from the
transceiver speaker. OFF: No DTMF Side Tones are heard.
- DT-ST: Side Tones are heard only from manually keyed DTMF
codes.
- ANI-ST: Side Tones are heard only from automatically keyed
DTMF codes.
- DT+ANI: All DTMF Side Tones are heard.
16
R-TONE-
Tone-burst
1000Hz[0] | 1450Hz[1] | 1750Hz[2]
| 2100Hz[3]
1000Hz, 1450Hz, 1750Hz，2100Hz Tone-burst To send out a
tone-burst;