User's Manual

press [MENU] to confirm.
5. Press [MENU][1][4][MENU] to come to Menu 14: TX CTCSS, press [UP]/[DOWN] to select 67.0,and then
press [MENU] to confirm.
6. Press [MENU][2][6][MENU] to come to Menu 26: Memory, and then Press [1][0][MENU] to confirm (Ex.
CH-11).
7. Press [V/M] return to MR Mode. Channel number will re-appear.
Ex: Programming a Channel Repeater Offset with CTCSS Tone
EXAMPLE New memory in Channel 20:
RX = 462.625 MHz
TX = 452.625 MHz(This is a (+ 10.00) Offset)
TX CTCSS tone 67.0
RX CTCSS tone 67.0
Procedure 3.11.2 Programming a Channel Repeater Offset with CTCSS Tone
1. Set radio to VFO Mode by pressing [V/M] Channel number at the right will disappear.
2. Press [MENU] [2] [7] [MENU] to come to Menu 27: Delete, Press [1][9][MENU] to deletes prior data in
channel (Ex. CH-20).