User's Manual

programming if permitted.
Channel Mode (MR) - Used for selecting preprogrammed channels.
All programming must be initially none in the frequency mode (VFO) only. From there you have the option of
assigning the entered data to a specific channel for access in the channel mode.
Call tones, TX/RX tones, squelch, and power settings are adjustable on saved channels in channel mode.
Ex. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 11:
RX/TX = 462.625 MHz
TX CTCSS tone 67.0
Procedure 3.11.1 Programming a Simplex Channel with CTCSS tone
1. Set radio to VFO Mode by pressing [V/M] Channel number at the right will disappear.
2. Press [MENU][2][7][MENU] to come to Menu 27: Delete, Press [1][0][MENU] to deletes prior data in
channel (Ex. CH-11).
3. Press [EXIT] to exit the menu. Enter RX frequency [4][6][2][6][2][5] on you numeric keypad.
4. Press [MENU][1][2][MENU] to come to Menu 12: RX CTCS, press [UP]/[DOWN] to select 67.0,and then