User's Manual

For more information see the section called “11 RX DCS - Receiver DCS” and the section called “13 TX DCS -
Transmitter DCS” in Appendix C, Menu definitions.
■CTCSS
CTCSS is set with menu 12 RX CTCS and menu 14 TX CTCS.
For a complete list of available CTCSS codes and corresponding sub-tone frequencies, see Appendix D, CTCSS
Table.
Procedure 3.5.2 CTCSS setup how-to
1. Press the [MENU] key to enter the menu.
2. Enter [1][2] on the numeric keypad to get to receiver CTCSS (RX CTC).
3. Press [MENU] to select.
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad.
5. Press [MENU] to confirm and save.
6. Enter [UP] on the numeric keypad to go to transmitter CTCSS (TX CTC).
7. Press [MENU] to select.